Associate Contractors License Practice Exam

These questions are part of the practice quiz. Start practicing

• What is the purpose of a Fishbone Chart?
• Which document describes quality of work, the quality of the materials, and the construction execution procedures?
• Which graphical measurement tool provides a pictorial representation of a process?
• How is the fireproofing requirements of a steel structure determined?
• What is the most important parameter used to control the strength of concrete?
• Which type of sling material should not be used in environments with acids or phenolics?
• What does the surveying abbreviation "TP" stand for?
• What does the acronym MSDS stand for in safety documentation?
• Which procedure describes the Standard Proctor Test?
• In a court case requiring "due diligence," what would be an example of demonstrating it?
• What type of specification requires maintaining free water in foundations and trenches?
• What is the maximum horizontal travel distance to retrieve a fire extinguisher in a Building Area?
• What does eliminating the isolation problem in TQM aim to achieve?
• Which type of bond guarantees a subcontractor's performance?
• What is the purpose of a lift slab form system?
• What role typically completes the time card on a construction site?
• Which graphical tool would you use to analyze process flow?
• Which materials are incorporated by reference and not normally shown on the plans or in the technical specifications?
• What type of soil is considered cohesive?
• What document is used to allocate estimated costs for items listed and for requesting progress payments?
• Which trade involves the application of stucco?
• Which of the following is NOT a component of bid shopping?
• Which test is conducted on cohesionless soil to assess the distribution of grain size?
• Which type of masonry cement is used where bond and lateral strength are important?
• What is the chemical reaction called when Portland cement is mixed with water?
• Which system is the CO connected to?
• What does the abbreviation I.E. indicate in utility plans?
• What is the stress term called that is induced by pulling apart in a longitudinal direction?
• Which document is submitted by each bidder stating that their bid was arrived at without any conferring with other prime bidders?
• What are the GENERAL RULES for considering the JOB DIARY as admissible evidence in court?
• What is the maximum rate of pour allowed for a wall over 14 feet in height, according to ACI standards?
• What is the primary focus of the General Duty Clause?
• What term measures an object's ability to cause turning, rotating, or twisting about an axis of rotation?
• If a contract has a clause adjusting prices based on a 20% variation in quantities, what type of contract is it?
• What is Free Float defined as in project management?
• Which document establishes the forms, content, and procedures for submitting the bid proposals?
• What should a candidate do if they fail to meet the minimum score on an examination?
• Which type of law case requires you to prove due diligence?
• What is the primary purpose of a Notice to Proceed?
• What is another name for soil that contains equal parts of sand, silt, and clay?
• What should the structure of a safety folder include when organizing agendas and minutes?
• Which document is utilized for correspondence between the Architect/Engineer (A/E) or owner and the contractor?
• What is the name of the law principle that allows the Contractor to incorporate a price quotation into their bid proposal?
• Which of the following is a standard method for calculating the load-bearing capacity of a steel beam?
• Which type of soil poses significant dangers during excavation due to its deceptive appearance?
• Which document is primarily utilized to keep the Code of Federal Regulations (CFR) up to date?
• Under which Division and Level numbers should agendas and minutes be filed?
• What masonry components run continuously around the perimeter of a building and provide bearing for beams and joists?
• The Vendor has quoted you a price of $9,270 CIF for an item. What does this price quote indicate?
• What is the main purpose of Administrative Law?
• Which trade applies heat-resistant materials to structural steel and sprays refractory material on tanks?
• What kind of temporary system is utilized to support concrete poured continuously in a vertical direction?
• Which Part of the OSHA Standards pertains to General Industry?
• What is the term for the stress that has the narrow dimension carrying the load, with top fibers in compression and bottom fibers in tension?
• What are the content areas that a supervisor must consider when writing a disciplinary memorandum?
• What constitutes a work-related catastrophe according to OSHA?
• Which type of law governs the sales and purchase of goods?
• What is the primary environmental benefit of using fly ash in concrete?
• According to OSHA standards, what is described in STD 3-1.1 regarding accident prevention programs?
• What does AIC stand for in construction organizations?
• Which type of wall is preferred in areas with severe weather exposure for maximum rain penetration resistance?
• Which document is utilized to interpret the contract?
• What item must be on a time card for it to be admissible evidence in court?
• What is the purpose of an OSHA compliance inspection?
• Which document lists the itemized content required for submitting a Contract Change Order Proposal?
• What structural steel component is associated with the designation "LH"?
• What is the term for earth material that is removed during excavation?
• If you are the second low bidder on a project, how should you respond to a subcontractor asking for comparative bid information?
• Which document is typically used to request payment for materials?
• What is the purpose of the Contract Change Order Proposal?
• Which information must be posted at the job site and easily accessible to all employees at all times according to OSHA?
• What is the normal lift range in inches for attaining the specified density percentage when compacting structural fill?
• Which of the following soils typically has the highest cohesiveness?
• Which report would be considered admissible evidence in a court of law?
• Which document is signed by the Owner, A/E, and Contractor to modify the agreement's terms and conditions?
• Which type of concrete work is primarily affected by pouring speed limits?
• Which masonry component allows for freedom of movement in a masonry wall?
• Which party holds all of the liability for a performance specification?
• Which trade erects jin poles for making heavy lifts and assembles cranes?
• In case of a contractual dispute, what should be the initial course of action for the affected party?
• What is a requirement outlined in OSHA training regulations?
• Which of the following is NOT a principle needed to form a valid contract?
• Why is it important to record conversations during construction site meetings?
• Which document makes changes, modifications, and corrections prior to bid opening?
• What is the name for wood members graded according to the load carried on their cross-section?
• Which sling material is best known for its abrasion and high-temperature resistance?
• What is typically required from a contractor after winning a bid?
• What is the procedure for informing the Architect/Engineer about a desired change in a shop drawing?
• According to CSI and AIA, which document states the number of copies of Shop Drawings that must be submitted?
• Which type of soil is categorized as cohesionless?
• Which type of insurance is required for damage to rebar inside concrete forms from high winds?
• What does the B-B designation platform refer to?
• You have an assumed sling angle of 24 degrees but the actual angle is 19 degrees. What effect does this have on the pounds per leg on the sling?
• What type of insurance is needed when a severe rainstorm causes structural damage?
• Which legal entity is subject to double taxation?
• What legal principle refers to a contractor being referred to other documents not contained in the provided documents?
• What do the EEO, ADA, and DBE laws have in common?
• If the Unit Weight Coefficient is 1.0, what is the weight range of a cubic foot of concrete for design purposes?
• Which poster describes regulations for wage payment and hours of work for all industries and must be posted at the job site?
• The VTR is connected to which plumbing system?
• Under which act is the use of Yellow Dog contracts prohibited?
• What can be recovered by an individual from the officers or managers of a company under the Civil Rights Act of 1991?
• What does the new pictograph for an electrical fire extinguisher depict?
• What management concept aims to foster open communication and cooperation among project participants?
• What is structural steel most vulnerable to regarding failure?
• Where do you extract the ORIGINAL PRICES from for calculating a NET CHANGE?
• For a change in the project, what document must be modified according to the project documents?
• Which visual inspection term indicates that the soil has open cracks on the horizontal ground or face of an excavation?
• If Purchaser and Supplier are used in the terms of the contract, how will courts interpret this?
• What is considered the weakest pattern bond in masonry?
• In the construction industry, what does the term "aggregate" refer to?
• Which document must be used to provide an official notification to stop work on a project due to payment issues?
• According to federal regulations, what is the maximum number of days a company has to submit the non-United States citizen form?
• Which description provides the BEST example of how to report progress on the job site?
• Which soil classification system is recognized by state highway and transportation officials?
• Which document is necessary for employers to ensure that employees are aware of workplace safety?
• What does UL stand for in construction terminology?
• What is the purpose of a Construction Report?
• What document outlines the costs associated with construction items and expected payments?
• When is the Certificate of Substantial Completion prepared?
• What material is sprayed onto structural steel to enhance its fire resistance?
• If a proprietary specification does not perform as stated, who is responsible?
• What is termed as the wrongful act of ignoring safety rules after being informed of them?
• Which institute is known for developing standards related to steel construction?
• What does a Yellow Dog contract prohibit?
• Which safety approach focuses primarily on worker behaviors to minimize risks?
• Which of the following is the proper Design Activity Sequence in a Design/Build logic network?
• Which of the following documents is a contractual agreement used to move (ship) the goods from the vendor to the jobsite?
• Which piece of equipment is most efficient for excavating inside a cofferdam?
• What is the minimum number of days for posting the De Minimis Violation?
• What do you call the wood member that is at least 4 inches thick and 2 inches wider than its thickness, graded by bending strength?
• In 1935, what did the Wagner Act enact regarding labor relations?
• What types of activities are primarily considered when trying to shorten a project's length?
• In a wooden beam scenario, what are the values in lbs for R1 and R2 if the beam is 20 feet long and has a concentrated load of 500 pounds at a distance of 15 feet from R2?
• When is the best time to distribute the working agenda to meeting participants?
• What is the weight of a bag of Portland cement in pounds?
• When conducting resource leveling, what is the main goal?
• Which categories are included in a Daily Job Diary?
• What is a common term for a specific type of risk allocation in contracts?
• What characteristic is important when selecting type M masonry cement?
• Which reference is incorporated for the design of vertical and horizontal forms that must be kept on-site?
• What is typically included in a contractor’s bid breakdown?
• What is the function of a bracing system in a steel structure?
• What does the acronym CSI stand for in construction specifications?
• Which item is typically recorded in a Job Diary?
• Masonry walls typically require which type of joint to manage cracking from movement?
• Which document is used internally to request prices for materials needed for a project?
• What insurance type covers injuries sustained by workers on a job site?
• What is the term for a material that deforms slowly when a force is applied to it for an extended period of years, even though the force is too small to cause failure in a short period of time?
• Which document describes the suggested agenda for the preconstruction meeting?
• What is the name of the legal entity that allows net income or losses to flow through to shareholders' individual tax returns?
• Which procedure describes the Modified Proctor Test?
• Which of the following is a benefit of thorough documentation on a construction site?
• What reference source contains technical lifting data for permanent overhead cranes?
• Which specification type is recognized for specifying a brand of marker board material?
• Which document states the procedures for submitting Shop Drawings according to CSI and AIA?
• What does the acronym ACI stand for in construction specifications?
• Which of the following items must never be agreed upon utilizing a form titled Purchase Order?
• What type of pavement system is subject to continuous abrasion from traffic?
• What is a common function of a water hammer arrestor in plumbing systems?
• What is the key feature of a performance specification?
• Which item is least likely to be included in a Job Diary?
• Which position is usually tasked with forecasting the cost at completion for field activities?
• In construction, what is the minimum number of employees that an employer must have to maintain records of occupational injuries and illnesses?
• What term describes the measure of how easily water flows through aggregate's voids?
• For labor services to be properly formed, which document should they be placed on?
• Which law establishes basic rules governing the sale of goods that is critical in establishing a Purchase Order?
• What physical property of aggregates affects the workability of concrete?
• Which brick position is commonly utilized on window sills?
• How should conversations with solutions be recorded for them to be admissible evidence in court?
• What is one reason to include weather conditions in daily reports?
• When reviewing a contractor's bid, the Instruction to Bidders is crucial for determining what?
• According to the Constructor's Code of Ethics, how should a Constructor treat all parties?
• Which trade wraps high pressure process piping and equipment?
• Which type of insurance provides coverage for injuries to non-employees near the work site?
• What principle is established by the Spearin Doctrine?
• What does the steel designation "C 12 x 20.7" signify?
• What kind of dispute can lead to a union calling for a secondary boycott?
• If a compliance officer notices a potential hazard but there is no existing regulation, under which provision can the contractor be cited?
• What is an injunction in the context of labor relations?
• What is the main advantage of using a smooth-wheel roller?
• Who has liability for a proprietary specification if an approved substitution fails?
• In relation to a cofferdam, what is the definition of a toe?
• What term is used for the maximum load a beam can support before failure occurs?
• Why is maintaining a Job Diary important for contractors?
• What is the moisture content percentage of the lumber stamp abbreviation of S-DRY?
• What is the maximum bending moment in lb-ft for a beam scenario where Reaction R1 is 225 lbs and it is pinned 12 feet from the load?
• Which party is responsible for obtaining building permits?
• Along which type of wall is a control joint typically placed?
• Which visual inspection term applies when soil layers on the face of an excavation show a ratio of four horizontal to one vertical?
• What is the primary purpose of an STD in safety regulations?
• For formwork installations, what is the implication of using inferior quality materials?
• What document ensures integrity in the bidding process by restricting the sharing of bid details?
• Which clause is considered a Condition Precedent?
• What filing method is used for agendas and minutes within a folder?
• What is the term for the stress induced by compressing the fiber longitudinally on its cross-section?
• Who is responsible for documenting daily activities and changes on a construction job?
• What is the primary responsibility of a Plasterer?
• What management philosophy emphasizes a performance and process-oriented approach to safety and health?
• What tool is best for displaying the correlation of two characteristics?
• What is the standard in North America for the orientation of the outer layer of plyform?
• Which aspect is most critical when planning a construction project schedule?
• What is fundamentally important in maintaining a construction license?
• What type of sling material can be used within a temperature range of minus 20 degrees Fahrenheit to 180 degrees Fahrenheit?
• Which type of sling configuration is better suited for handling loose bundles of pipe or rebar?
• What are the large stones placed at culverts or water edges to prevent erosion called?
• What is the role of the Planning Engineer in project management?
• What is another term used for sheeting in construction?
• Who is typically responsible for verifying all materials and field measurements on shop drawings?
• What does the term fast tracking refer to in construction?
• Which system is designed to create a safe enclosed work environment while managing soil and water?
• In concrete, what is the purpose of adding superplasticizers?
• Which act was enacted in 1959 and requires union officials to report activities?
• What document restricts the contractor's liability after conditions of completion are met?
• What does the Mean's Book unit of measure abbreviation V.L.F. stand for?
• Which type of insurance is specifically designed to cover workers who are laid off?
• Which CSI part number is associated with installation procedures that contractors or subcontractors must adhere to?
• Which legal entity allows owners to take advantage of pass-through taxation?
• Which construction activity can be significantly impacted by wind?
• Which field manual test is used to determine the presence of a cohesive clay or silt?
• What is the typical weight of a 1-inch diameter steel bar?
• Which sieve size are the aggregates initially placed into for analysis?
• Which type of equipment is specifically used to excavate ponds or underwater soil?
• Which party is fully responsible for all liabilities under a proprietary specification if an alternative does not perform?
• Which of the following documents is typically incorporated by reference?
• What are aggregate particles smaller than the size of a grain of sand referred to as?
• Which fire extinguisher type would you use for a Class C fire?
• What does the safety acronym STD stand for?
• What do the field thumb penetration, pocket penetrometer, and shearvane measure?
• What type of bar is typically used as a standard reinforcing bar?
• What is the lifting system called that features two towers and a cross beam for lifting long equipment?
• What does featherbedding refer to, as prohibited by the Taft-Hartley Act?
• Which crafts are welders associated with?
• For a Design-Build Schedule to be valid in court, which of the following must be included in the preliminary schedule?
• In which legal structure are owners personally liable for debts and obligations incurred by the business?
• What is the definition of bid peddling?
• How should Ed handle the situation regarding the incorrect contract value?
• What are the additional provisions that were ADDED by the 1991 Civil Rights Act?
• In masonry, what is the primary role of lime in mortar?
• Which document specifies the Proctor Test, the percentage range, and the Optimum Moisture Content?
• What does the acronym OSHA stand for?
• What year was the Civil Rights Act, which introduced compensatory damages, passed?
• Which principle of law requires subcontractors to uphold promises that the prime contractor has relied upon?
• If shipping terms are FOB JOBSITE, between which parties is the Bill of Lading?
• What does the Owner/Contractor Agreement establish?
• What type of fire extinguisher is used for extinguishing a fire caused by a combustible metal like aluminum?
• Which form is necessary for a contractor to validate their bid is competitive without collusion?
• After the signing of the Agreement, what must the contractor submit within fourteen days?
• What type of disputes is the NLRB empowered to resolve?
• What type of contract is formed when two contractors agree to combine their resources for a specific project?
• What is the stress term called which is a measure of the stiffness or resistance to deflection?
• What typically distinguishes proprietary specifications from others?
• Which entity sets the worker's compensation manual rates?
• What document outlines the terms under which construction services are to be performed?
• Which policy covers all parties involved under one unified insurance approach, purchased by the owner?
• Which document is primarily used to record site progress?
• What type of management initiative seeks to engage all stakeholders in a project's success?
• Which of the following motor ingredients improves the mortar's workability?
• Which term refers to the process of following up on materials to ensure they arrive according to schedule?
• When filing agenda and minutes, what is the recommended position for the most recent entries?
• What should a superintendent do if approached with a potential bribe from an inspector?
• Which document guarantees to the Owner that the successful Contractor will sign a contract?
• What type of contract is based on stated bid quantities with payment for actual quantities placed?
• Which organization is responsible for establishing the procedures for penetration test boring?
• What does the acronym CFR stand for in the context of safety standards?
• What is a common responsibility of an Estimator within a construction firm?
• What is typically the first step in preparing steel for welding?
• Which position typically performs the Formwork design calculations?
• Which method is most commonly used to assess soil bearing capacity?
• Which trade is responsible for fabricating and erecting air distribution duct work?
• What action must a contractor take if their claim is rejected according to AIA documents?
• What does the term "Uprights" refer to in timber shoring tables?
• Which of the following trades aligns and installs drain, waste, and vent piping?
• Where should a fire extinguisher be located in a multistory building?
• In which situation would using an inverted rod be most advantageous?
• Why are Pre-qualification Forms important in the bidding process?
• What is the structural lumber grade used where straightness and strength are the most important consideration, such as in concrete formwork?
• Who issues the Certificate of Occupancy?
• What is the stress term called that is induced by the tendency for the upper fibers to slide over the lower fibers as a beam bends?
• What method is commonly used to ensure clear communication on construction projects?
• What is the name of the clause stating a Subcontractor is bound to the Contractor similarly to how the Contractor is bound to the Owner?
• What are the best steps of a good material receiving procedure?
• In the designation 3/4 inch, 6 x 19 - IWRC, what does the number 19 indicate?
• What is the official name of the technical reference source for placing slab bolsters published by CRSI?
• Which piece of equipment is generally used for large excavation tasks?
• How important is the inclusion of planned weather losses in the preliminary schedule?
• What is the correct name for the acronym ADA?
• Which test is used for fill material designated for high design loads, such as airport runways?
• Which type of law is the most difficult to change?
• What does a sieve size of No. 40 indicate?
• What is a histogram primarily used for in graphical measurement tools?
• What are the two fee methods that an Agency Construction Manager may offer?
• What does the bar support abbreviation BBU mean?
• Which safety criterion has the greatest potential for reducing accident costs?
• What document is signed by the Owner and A/E instructing the Contractor to make a change before agreeing on a price adjustment?
• For a beam that is 16 feet long with a concentrated load of 900 pounds at a distance of 4 from R2, what is the maximum shear in lbs?
• In a wire rope designation of 1-3/4 inch, 6 x 37 - IWRC, what does the number 6 represent?
• What is the primary difference between a Subcontract Agreement and a Purchase Order?
• When two wythes are tied together with a brick positioned for structural integrity, what is this brick position called?
• Which orientation of plyform provides the strongest formwork system?
• What is critical to evaluate before excavating cohesive soil?
• What type of legal entity faces challenges in raising new capital for business expansion?
• Which masonry components are installed over openings in block walls to carry the load around the opening?
• Which type of schedule is often used to show the chronological order of activities in a project?
• What does the Mean's Book unit of measure abbreviation Sq. stand for?
• When should construction activities be documented on time cards?
• During what part of the construction process is it crucial to meet with Subcontractors to discuss their bids?
• Which type of masonry cement is typically used for foundation walls and isolated piers?
• What is the name of the organization which publishes a manual on the spacing requirements for bar supports?
• What document specifies the coverage amounts for the insurances related to a project?
• Which of the following items must be included on an equipment time card for it to be admissible evidence in a court of law?
• What does the abbreviation bpf stand for in construction terminology?
• What ingredient is typically added to mortar to retemper it?
• According to AIA documents, what must the Contractor request in writing after a claim rejection by the A/E?
• What does the Mean's Book unit of measure abbreviation C stand for?
• Who is ultimately responsible for worker safety in construction sites?
• What does the abbreviation of S2S stamp on a piece of lumber mean?
• Which document outlines the duties and responsibilities of each party involved in a contract?
• Which organization is responsible for publishing structural steel design properties manuals?
• Which of the following activities creates a hostile work environment under the Sexual Harassment provisions?
• What is the purpose of a bond beam in masonry construction?
• Under the structural lumber classification system, what is the name of the top grade?
• Which construction activity can be negatively affected by humidity?
• What might indicate a substantial requirement of evidence documented in a Job Diary?
• During which phase of a project must the Contractor provide the Subcontractor Agreement to avoid refusal to sign?
• Which organization would likely provide guidelines for sustainable building practices?
• Which skills typically increase as a person moves up an organizational chart?
• What is a critical component that must be present for a proposal to be considered responsive?
• What is the correct name for the acronym DBE?
• When specifying roof drain setups and insulation, which type of specification is used?
• Who typically assesses the quality of work completed by the Subcontractors?
• Which equipment is most effective for compacting granular soils like sand and gravel?
• What is the term for the ability of water to flow through soil via void spaces?
• What document must a contractor submit to the owner to indicate they will leave the job site if a late payment is not received?
• Which of the following does NOT fall under the purview of the Civil Rights Act?
• Which document applies to the Contractor and the Subcontractors and describes the administrative, procedural, and temporary procedures on the job site?
• Who is responsible for comparing the soil borings to the standard Relative Density and Consistency Table in the Soil Report?
• In plumbing terms, what does the abbreviation CO typically refer to?
• Which of the following soft wood species used for structural lumber has the highest fiber bending and modulus of elasticity?
• What is the process called for pouring concrete underwater?
• If you are lifting 1000 pounds with a two-legged sling and the horizontal sling angle is 45 degrees, what is the load in pounds on each leg?
• How often should weather conditions be recorded to ensure proper evidence?
• What is the Rated Load Capacity for a hook that is 1⁄2 off center?
• Who is typically responsible for estimating and pricing temporary structures on a construction site?
• What is a contract called if the design and scope are undefined and the Owner pays for all Direct Labor and Materials?
• What is the purpose of an EMR?
• How is Total Float defined in project scheduling?
• What responsibility does the Subcontractor have during the project execution phase?
• What does the abbreviation EMR stand for?
• What is the minimum ratio for a layered soil system according to OSHA?
• Which trade installs low voltage intercom and security systems?
• Which factor is crucial in the overall quality of concrete?
• Which trade cuts and installs panes of glass in storefronts and glass curtain walls?
• Which organization is tasked with standardizing testing methods and technical specifications?
• Which document establishes the actual start date from which the project duration is calculated?
• What is one of the main uses of sand in mortar mixes?
• When is a tremie method of pouring concrete typically used?
• What is the primary cause for a masonry wall to collapse while under construction?
• At which point is the Invert Elevation (I.E.) calculated to?
• What type of insurance covers the Contractor's Off-Road Construction Equipment?
• In the context of project specifications, what is a common trait of a descriptive specification?
• Which trade is responsible for assembling and aligning underground pipes outside a structure?
• Which document serves as proof of data and quantities used for materials on-site?
• What is the full name of the TIA organization in the construction sector?
• Which law establishes basic rules governing the sale of goods?
• What is the primary function of a tower crane?
• Which principle describes the clear understanding between parties needed for a contract?
• Which type of law uses the Spearin Doctrine or the Eichleay Formula?
• What term describes a proposal that does not meet all contract formation principles?
• What type of document is used for correspondence between the home office and the job site?
• Which legal entity type allows the greatest flexibility for ownership changes?
• Which trade seals the head and butt joints for the drywall in commercial projects?
• What are the commonly used soil classification systems based on grain size?
• If a fire burns down the 3rd floor of an existing structure where subcontractor materials were stored, does the contractor have insurance coverage?
• What type of chart helps identify the most significant issues in a process?
• What is the project delivery method called when the design and scope are partially undefined and the owner holds multiple contracts with various parties?
• What does the acronym ASPE stand for in the construction organization context?
• Which concrete characteristic is improved by air-entraining the concrete?
• What is essential for the success of TQM and TSM initiatives?
• What is the consequence of ignoring a hazardous condition in the workplace?
• Which document is used to request materials from the contractor's storage bins?
• What type of hazard requires immediate attention and may cause serious harm?
• What type of issues are typically documented in a Job Diary?
• What do union officials need to report under the Landrum-Griffin Act?
• What does IWRC stand for in wire rope specifications?
• Which test method is primarily used to assess the soundness of materials?
• In the context of workplace safety, what is a significant risk of a trench without proper safety measures?
• What type of insurance allows the contractor to assume another party’s liability through a hold harmless clause?
• What is the grievance procedure established in labor agreements?
• What type of contractor advocates for decision making regarding crew size and wages based on merit?
• What condition must be met for a trench to be considered safe according to regulations?
• What is the soil state called when the soil is excavated?
• What management philosophy focuses on continuous improvement to enhance competitiveness?
• If the plumbing plans indicated DS on the plans, what system would the DS be connected to?
• What are the components of a job-built boiler that a Boilermaker will assemble together?
• You need to establish grade to the bottom of a footing that is 1 foot thick with a top elevation of 102.33'. With an existing grade of 106.14' and a backsight of 6.78', what is the correct reading of the rod at the bottom of the footing?
• What does the Retainage typically ensure?
• What does the Atterberg Limits test measure in cohesive soils?
• What does a combination specification incorporate?
• For a dredging project on Lake Michigan, what is required as an insurance rider?
• What is a typical number for the modulus of elasticity?
• In a bidding situation, what is the best approach if you find out you are the higher bidder?
• Which party is generally responsible for designing temporary structures in a construction project?
• What was established against which party by the Taft-Hartley Act enacted in 1947?
• What does OSHA require for shoring systems that exceed 20 feet in depth?
• What organization does ASHRAE represent in the construction industry?
• Which graphical measurement tool illustrates a trend over time using a line graph?
• What is a key focus of the ADA law?
• What is the primary objective of a Bid Bond?
• What term describes when a sub-bidder approaches a general contractor to lower the original price?
• What is typically required for proper project documentation?
• Which tests are suggested by McLaughlin and Jensen to prove arguments for a specific type of contract?
• What does the abbreviation SPT stand for in soil testing?
• What type of weld is used to connect two pieces of metal together end to end?
• What is the primary purpose of a change order in construction management?
• Which system is specifically designed to restrain horizontal temporary loads like soil and water?
• Leadtimes are primarily used to estimate time durations for which type of activities?
• What equipment design allows the bucket to push up from below the excavation?
• What items must be consulted to properly price a New Contract Change Order Proposal for a Road and Bridge Project?
• What is one of the main objectives of a Contract Manager during the project lifecycle?
• Which legal structure risks personal assets for actions taken by others in the business?
• What is the minimum nominal thickness for plywood used in common formwork systems in construction?
• Which document would a contractor reference for installation procedures according to CSI?
• What is the name of a wood member that is graded by its wider dimension, measuring 2-4 inches thick and at least 6 inches wide?
• What is the weight of a #5 deformed bar in pounds?
• What is the term for the process of shortening a logic network?
• Which term describes the process of shifting activities within their available free floats?
• What is a jurisdictional dispute?
• What is the term for a material that strains slowly when a force is applied over extended periods, even if the force is too small to cause failure in a short time?
• Who is responsible for the design of the concrete formwork?
• Which document specifies how contracts should be managed and executed?
• Which technical resource must be consulted to determine the bar support spacing for a concrete bridge deck?
• What is the term for an excessive vertical load caused by construction equipment or spoil pile near the trench edge?
• Which clause is included in contracts due to potential uncertainties in labor or material prices?
• What is a key feature of the slip form system in concrete placement?
• When must the Agreement be provided to prospective bidders?
• If a Contractor does not accept a contract after receiving a Notice of Award, what will they lose?
• Who has the responsibility for the design of the fire suppression systems as specified in the contract?
• When hiring employees, which form must they fill out to provide their marital status and number of exemptions?
• Who is responsible for recovering loss during shipment if the terms on the Bill of Lading are FOB Factory?
• What is the primary purpose of riprap in construction?
• What type of construction document typically specifies standards for materials and construction practices?
• What type of diary entry may be used as admissible evidence in a court of law?
• Which mortar ingredient decreases the shrinkage of mortar while setting and drying?
• Which international standard is concerned with quality management systems?
• In structural engineering, what is the primary focus of load-bearing calculations?
• What is the name of the clause stating that a company must provide a workplace free from known hazards?
• Which of the following statements would be considered admissible evidence?
• Who is liable for a descriptive specification?
• What symbol is used to indicate that a weld is required on all four sides?
• In construction, what does the acronym UL primarily ensure?
• What is the role of water in the curing process of concrete?
• What is the main goal of a Constructor according to the Code of Ethics?
• Which document allows for the Commencement of work in the project?
• Which Part of the OSHA Standards focuses specifically on Recordkeeping?
• What information is typically included in the terms and conditions of a purchase order?
• What do horizontal lines on an organizational chart typically indicate?
• What is the primary drawback of using a Bar Chart for project scheduling?
• What is the best source for developing activity descriptions for a logic network in construction scheduling?
• What is the name of the wood member that is graded by its bending strength, measuring 2-4 inches thick and at least 6 inches wide?
• Which document is issued to the Contractor for failure to perform according to the specifications?
• In terms of graphical measurement tools, what does a Scatter Diagram represent?
• Which scheduling technique involves reducing the project timeline by overlapping tasks?
• Which party primarily develops the shop drawings?
• Which agency regulates the reporting of work-related catastrophes?
• Which act requires contractors to pay prevailing wage rates on federally-funded projects?
• Which type of soil has no cohesive strength?
• What document establishes the reference date for the commencement of a project?
• What structural steel component does the designation "VL" refer to?
• Which circumstance can lead to loss of insurance coverage for a contractor?
• What task is specifically associated with the work of a Pipe Layer?
• Which of the following represents the proper Procurement Activity Sequence for vendors or suppliers?
• What does the safety acronym CPL stand for?
• What is the relationship between the VTR and the sanitary sewer system?
• What document specifies the Bid Bond Percentage?
• What is the strongest overlap of masonry units when constructing a wall?
• Which trade operates the motorized concrete buggies?
• What does a solid backwards flag on a pole indicate when associated with a square weld symbol?
• What is the full name of the organization represented by the acronym CRSI?
• What are the internationally recognized quality standards known as?
• Which act prohibited the use of unfair labor practices associated with union pressures?
• Which field manual test is used to differentiate between cohesive material with fissures, unfissured cohesive material, and granular material?
• What does the bar support abbreviation SB mean?
• What color and symbol indicate that a specific class of fire is prohibited on a fire extinguisher?
• What is the term for a sequence of activities that must be consecutive due to crew or equipment availability?
• Which trade operates equipment to place steel sheet piling?
• A gradation chart shows a line with a constant slope indicating the same amount of material is retained on each successive sieve. What is this gradation called?
• In soil density calculations, what does the abbreviation BCY stand for?
• Which trade is responsible for pouring, finishing, and polishing floors to reveal marble chips?
• Which graphical tool shows trends like work hours per square yard over a time period?
• What does "close sheeting" refer to in a shoring system?
• What does AISC stand for in construction terminology?
• What is the term for the principle that refers the Contractor to other documents not included in the package?
• Which system is used to support an existing structure when new excavation is below the foundation?
• Which party is typically responsible for obtaining the necessary permits for construction projects?
• Which of the following sling angle ranges is best for lifting without making the lift extremely dangerous?
• What are the main components of a cofferdam or support system?
• What is the primary purpose of OSHA laws?
• What type of specification describes a specific product from a manufacturer?
• What is the term for when contractors conspire to defraud project owners?
• What does the term "hot-cargo" signify in labor agreements?
• Which document describes the business procedures for a specific project and changes the initial procedures?
• Which legal entity is characterized as having perpetual existence?
• In concrete work, why is it important to maintain a copy of the design standard on-site?
• How should the nodes on a logic network be numbered?
• What visual inspection term describes a small amount of material that separates from the face of an excavation and trickles down?
• What document outlines the conditions for requesting a weather time extension?
• In a construction setting, who typically oversees the scheduling of subcontractors?
• What term is used for soil that is protruding up from the bottom of the excavation?
• Which organization published a new design standard for loads on structures during construction?
• What is the most common position used for bricks in wall construction?
• Which piece of equipment is typically used to support construction operations involving lifting heavy loads?
• What document must be submitted to the Owner for bid consideration before receiving the bidding documents?
• Which CSI part number provides information on Reference Standards that contractors or subcontractors must follow?
• What is the soil state called when it is in its natural, in place condition?
• What is one of the main advantages of detailing conversations in a Job Diary?
• What is the primary component used to create an asphalt pavement?
• What test focuses primarily on the part of the contract that UCC applies to goods?
• Which legal instrument regulates worker safety in the U.S.?
• What term describes the complete process of obtaining materials?
• Which contractor(s) would receive a citation for an unsafe trench during an OSHA inspection?
• What is the purpose of the ADA law?
• What is the primary focus of the Telecommunication Industry Association (TIA)?
• How should the Safety Agenda and Planning Minutes be organized within their respective folders?
• What is often the result of bid rigging?
• What must you provide the supplier to ensure a complete description when ordering wall ties?
• What type of inspection is given top priority by OSHA?
• Which amendment of the U.S. Constitution addresses due process?
• Which type of legal entity provides individual asset protection from business creditors?
• Which document issued by the Architect illustrates what is to be built?
• What is the name of the form signed by the contractor at bid opening to ensure non-communication of bid contents?
• Which period of time does the Bid Bond cover?
• What is the purpose of the EEOC law?
• If a construction addition is out of square, what is the recommended action for Ed?
• What type of insurance is necessary due to high winds damaging high concrete wall forms?
• What is the maximum time allowed for reporting a death or catastrophe to OSHA?
• Which section of the OSHA Act states that employers must provide a hazard-free workplace?
• What does the acronym EEOC stand for?
• Which form must be completed by all non-United States citizens?
• Which of the following would be an example of Due Diligence?
• How are most U.S. government contract disputes initially handled?
• Under F.O.B. Factory terms, when does the responsibility for goods change?
• What is a potential consequence of allowing subcontractors to store materials on a site not defined within the contract?
• Which property of mortar is increased by the process of retempering?
• What does the term 2/10 Net 30 mean?
• Which document outlines the number of copies of Owner installation and operating manuals that must be submitted at project closeout?
• Which type of masonry cement is primarily used for reinforced masonry?
• What types of projects establish prevailing wage rates?
• What is the weight of a cubic yard of concrete?
• Which type of Portland cement is used where an early strength gain is important?
• Who typically develops the overall project logic network and schedule?
• Which type of steel structure is most prone to buckling under load?
• What is the official name of the technical reference source for formwork design published by ACI?
• What does the plumbing abbreviation VTR stand for?
• What is the diagonal measurement in feet and inches for a rectangular structure that is 60' - 9" long by 42' - 6" wide?
• How frequently should a sling be inspected before use?
• What is the quality of aggregate that resists weathering known as?
• What categories are typically included in a Daily Construction Report?
• Which bond is more robust than stack bond due to alternating courses of bricks?
• Which letter and symbol identify the extinguisher for flammable liquid fires?
• Which of the following items are not shown or specified in the construction documents for a reinforced concrete structure?
• According to OSHA, which document must be filled out immediately after an accident by the supervisor describing the accident in detail?
• Which trade installs piping and equipment for fire protection systems?
• What is the maximum horizontal travel distance to retrieve a fire extinguisher in a Fuel Service Area?
• Which inspection term is used for soil that is protruding from the face of an excavation into the excavation?
• Which OSHA form is used to report multiple work-related injuries and illnesses annually?
• Which type of law establishes restrictions or protective restrictions to a piece of property?
• What is the term used when there is upward water flow into the bottom of an excavation?
• What term refers to soil that has sunk on the horizontal surface of the excavation?
• Which is the primary factor that determines if 97% density using the Modified Proctor Test will be achieved?
• What type of material is suitable for a chain sling?
• What technique is used to evaluate the liquid, plastic, semisolid, and solid consistency states of cohesive soil?
• What is the primary purpose of a water hammer arrestor?
• What system is utilized for restraining a vertical wall of soil in densely populated areas?
• Which trade is responsible for tying and placing rebar?
• Which trade is responsible for welding high-pressure process piping?
• What is the proper term for transporting off-road equipment to a construction site?
• What organization tests materials and products to safeguard against hazards?
• Which organization promotes a uniform system for organizing construction materials and documentation?
• What is the name of the violation where the firm is aware of a hazardous condition and makes no effort to eliminate it?
• What is the purpose of a Hot-Cargo Agreement as banned by the Wagner Act?
• Which of the following Insurance Coverage items are purchased as a Rider?
• Which field manual test checks for cohesive soil?
• What is clearly defined as "work" according to the courts in a construction context?
• Which criteria are utilized to evaluate an organization’s progress towards excellence?
• What is the diameter in inches of a #8 bar?
• Regarding time cards, what is an important aspect for legal compliance?
• Which document informs the owner that the work on a project will be stopped for failure to make a progress payment?
• How often should time be distributed to construction activities on time cards for admissible evidence in court?
• Which activity is a responsibility of a Millwright?
• Which term describes the force that tends to cause a member to fail by cutting perpendicular to the beam's longitudinal axis?
• Which of the following is the best example of an open-ended question?
• When and where must the OSHA Summary (OSHA 300A) be posted?
• What term describes the stress in a wood frame structure that allows part of the load from a weaker member to be distributed to adjacent members?
• Which of the following types of soil has high permeability?
• What is a primary characteristic of a Limited Liability Company (LLC)?
• Which position is primarily responsible for assigning crews, maintaining a job diary, and scheduling subcontractors?
• In the context of CSI and AIA, which document specifies the time frame for submitting Shop Drawings?
• What is air-entrained Portland cement concrete quite weak in?
• Which document establishes the labor rates on a project?
• What is the term for an illegal dispute that exerts pressure on a contractor to settle with a union?
• How many days does an employer have to contest OSHA citations?
• What are the drawings called that indicate the positioning and location of steel pieces issued to the contractor?
• What is the DBE hiring percentage stated in the EEO clause for the project?
• Which type of legal entity requires a charter?
• Which type of law governs agencies set up to carry out specific laws passed by the legislature?
• What is the maximum number of broken wires allowed in any eight diameter lengths of a 3/4 inch, 6 x 19 IWRC wire rope sling before it must be removed?
• Which document requests that additional information be submitted by the bidder within 48 hours of bid opening?
• If the plumbing plans had the abbreviation DS on them, what does DS mean?
• What is a significant advantage of using Total Float in project scheduling?
• What document informs the contractor that their proposal has been accepted?
• What term describes the void spaces in soil that water can occupy?
• Which project delivery system best supports the Fast-Track method in construction?
• Where will the weld be placed if there is a fillet weld symbol on the top of the welding symbol arrow?
• If the plumbing plans had the abbreviation DWV on them, what does the DWV mean?
• Which of the following systems is designed to carry the vertical load of the structure?
• Which trade installs and calibrates pressure and flow gauges?
• In masonry, what is the term used to describe a brick that is laid on its end?
• What is the term for an amount withheld from progress payments to ensure satisfactory completion of the work?
• Which Part of the OSHA Standards is specifically designated for Inspections?
• Featherbedding is an agreement that focuses on ensuring payment for:
• Under which law are corporations typically formed?
• What document terminates any further assessment of liquidated damages?
• Which construction professional is primarily responsible for project logistics?
• Which position is typically responsible for writing the subcontract agreements?
• What is the primary inspection method for ensuring the integrity of welded connections in structural steel?
• Which chart is known for representing causes in descending order of their impact?
• Which of the following items is typically contained in the Certificate of Substantial Completion?
• Which of the following is considered an unethical bidding technique?